8MM STACKED WEIGHT PIN (Bare Steel Version)
The Stacked Weight Pin is a patent-pending pin that allows you to add additional Olympic weight plates to any selectorized machine. The 8mm pin is a full 10″ steel pin surrounded by another 2″ of steel for a super-strong, sturdy hold for additional plates. Magnets at the base of the pin provide 21 pounds of pull to keep the pin attached to the weight stack. The Stacked Weight Pin is unique in that it is a 3-in-1 pin. It acts as an added weight, offers micro-adjustments, and allows for max stack capabilities.
With a weight of 5lbs, it automatically acts as an added weight when you are in between the traditional 10lb stacks. Gone are the days of lost adder weights at the gym sticking plates to the side in awkward ways. You are sure to increase your own training and continue to challenge yourself with the Stacked Weight Pin.
SPECS AND FEATURES
- Total Length: 10” or 9.65″
- Barbell Sleeve: 6″ long with 2″ diameter, fitting Olympic weights
- Micro loading makes a great adder weight for physical therapy and medical rehabilitation
- Six-shooter magnets with 21lbs of pull
- Pin Size:4” or 3.65″ long 8mm pin will fit most commercial-sized cable selectorized machines*
- The 4" rod length is the most common and best for machines with open pin holes through the entire plate, or with a machine that has a 4" selector pin. Measure your selector pin or plate width for the most accurate length needed.
- The 3.65" rod is best for machines that have closed pin holes behind the stack. This means the backside of the plate stack has no opening. Measure your selector pin for the most accurate length needed.
- The 5" or 6" rod is best for weight stacks that have a wider plate to them. The best fitting for this rod is the Inspire functional trainer series. Measure your selector pin for the most accurate length needed.
- Weight: 5lbs
- Max Weight: 100 lbs
- Patent Pending
- Made in the USA
- 100% USA Steel
- Bare Steel pins ship in 3-5 business days
- Cerakote pins ship in 2-4 weeks
TITANIUM NITRIDE (TIN) COATING
We also offer Titanium Nitride (TiN) coating services on all Stacked Weight Pin rods. Why Titanium Nitride? Titanium Nitride is unique in terms of finishes as it not only gives a custom look to your pin, but it also adds durability and reduces the friction on the coated part. Another plus with Titanium Nitride is that the average coating adds only 3 micrometers of thickness, so it will enhance the function and look of your pin and will prevent rust and additional wear on your pin rod. To get the maximum protection for the most used portion of the pin, Titanium Nitride will prove a worthy investment!
CAUTION:
- The Stacked Weight Pin is intended to be used as an adder weight attachment only. Do not use the pin as a selector pin with added weight. It could cause bending of the pin and result in serious injury.
- It is important to check and verify the weight capabilities of your cable machines prior to use. Failure to do so may result in serious injury.
*NOTE: It is important to measure your selector pin or stack hole for the most accurate fit. A digital caliper will provide the most precise fit and are inexpensive and very convenient to have. You can find them on Amazon. If unsure of fit, measure first.
